Home
›
ENGINE · 5L-E
›
ENGINE CONTROL SYSTEM
›
ENGINE COOLANT TEMPERATURE SENSOR
ENGINE COOLANT TEMPERATURE SENSOR > INSPECTION
for Preparation
Click here
1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR
Measure the resistance of the sensor.
Standard resistance:
Tester Connection
Specified Condition
1 - 2
2.32 to 2.59 Ω at 20°C (68°F)
1 - 2
0.310 to 0.326 kΩ at 80°C (176°F)
If the result is not as specified, replace the engine coolant temperature sensor.
NOTICE:
When checking the sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.