Home › BODY › ENGINE HOOD / DOOR › TAIL GATE

TAIL GATE > REMOVAL

for Preparation Click here



1. REMOVE TAIL GATE SERVICE HOLE COVER


    B205709E02
  1. for J Deck:

    1. Remove the 8 screws and cover.

  1. for A Deck:

    1. Remove the 10 screws and cover.



2. REMOVE REAR BODY TAIL GATE LATCH ASSEMBLY (for J Deck)


    B205712
  1. for LH Side:

    1. Remove the 2 bolts and rear body tail gate latch.

  1. for RH Side:

    HINT:
    Use the same procedures described for the LH side.



3. REMOVE TAIL GATE HANDLE ASSEMBLY (for A Deck, w/o Key Cylinder)


    B205710
  1. Disconnect the 2 control rods as indicated by the black arrows in the illustration.

  1. Remove the 2 screws indicated by the white arrows. Then remove the handle.



4. REMOVE KEY CYLINDER (for A Deck, w/ Key Cylinder)


    B208281
  1. Disconnect the tail gate lock control link as indicated by the black arrow in the illustration.

  1. Remove the 2 bolts indicated by the white arrows. Then remove the key cylinder.



5. REMOVE LUGGAGE COMPARTMENT LOCK CYLINDER RETAINER (for A Deck, w/ Key Cylinder)


    B209027
  1. Detach the 2 claws and remove the retainer.



6. REMOVE TAIL GATE LOCK ASSEMBLY LH (for A Deck)


  1. w/ Key Cylinder:



      B208283
    1. Remove the 2 bolts.

    2. Disconnect the control cable and remove the tail gate lock.



    B205711
  1. w/o Key Cylinder:

    1. Remove the 2 bolts and lock.

    2. Remove the control rod.



7. REMOVE TAIL GATE LOCK ASSEMBLY RH (for A Deck)

HINT:
Use the same procedures described for the LH side.



8. REMOVE TAIL GATE HANDLE ASSEMBLY (for A Deck, w/ Key Cylinder)


    B208284
  1. Disconnect the control rod as indicated by the black arrows in the illustration.

  1. Remove the 2 bolts indicated by the white arrows. Then remove the handle.



9. REMOVE TAIL GATE LOCK CONTROL ASSEMBLY (for A Deck, w/ Key Cylinder)


    B209023E03
  1. Detach the cable clamp.

  1. Loosen the bolt.

  1. Remove the 2 nuts.



    B209024
  1. Remove the tail gate lock control assembly with the tail gate lock control link and 2 cables connected.

  1. Remove the bolt from the tail gate lock control assembly.



10. REMOVE TAIL GATE PROTECTOR RH (for A Deck, w/ Key Cylinder)


    B208286
  1. Detach the 3 claws and remove the tail gate protector.



11. REMOVE REAR DOOR NO. 1 LOCK REMOTE CONTROL CABLE ASSEMBLY (for A Deck, w/ Key Cylinder)


    B209025
  1. Remove the remote control cable.



12. REMOVE REAR DOOR NO. 2 LOCK REMOTE CONTROL CABLE ASSEMBLY (for A Deck, w/ Key Cylinder)


    B209026
  1. Remove the remote control cable.



13. REMOVE TAIL GATE LOCK CONTROL LINK (for A Deck, w/ Key Cylinder)


    B208288
  1. Remove the tail gate lock control link.



14. REMOVE CENTER STOP LIGHT ASSEMBLY (w/ Center Stop Light)


    B206470E02
  1. Disconnect the connector.

  1. Detach the clamp.

  1. Detach the 4 claws and remove the center stop light.



15. REMOVE TAIL GATE STAY ASSEMBLY


  1. for LH Side:



      B205713
    1. Remove the 2 screws and stay.

  1. for RH Side:

    HINT:
    Use the same procedures described for the LH side.