SPEED SENSOR > INSTALLATION |
| 1. INSTALL SPEED SENSOR (NC0) |
![]() |
Coat a new O-ring with ATF and install it to the sensor.
![]() |
Install the sensor with the bolt.
Connect the sensor connector.
| 2. INSTALL SPEED SENSOR (SP2) |
![]() |
Coat a new O-ring with ATF and install it to the sensor.
![]() |
Install the sensor with the bolt.
Connect the sensor connector.
| 3. INSTALL SPEEDOMETER SENSOR |
![]() |
Coat a new O-ring with ATF and install it to the sensor.
![]() |
Install the speedometer driven gear to the sensor.
![]() |
Install the sensor assembly with the bolt.
Connect the sensor connector.