HEADLIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE RADIATOR GRILLE |
![]() |
Using a clip remover, remove the 2 clips.
Remove the 2 screws.
Put protective tape around the radiator grille.
Detach the 6 claws and remove the radiator grille.
| 2. REMOVE FRONT NO. 1 WHEEL OPENING EXTENSION PAD (for 4WD and Pre-Runner) |
![]() |
Remove the 2 screws and extension pad.
| 3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
![]() |
Remove the 4 screws.
Using a clip remover, remove the 3 clips.
Partially remove the splash shield.
| 4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
| 5. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH (for 4WD and Pre-Runner) |
![]() |
Using a clip remover, remove the 2 clips.
Remove the 3 bolts and engine side cover.
| 6. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH (for 4WD and Pre-Runner) |
| 7. REMOVE FRONT BUMPER COVER |
![]() |
Remove the 2 bolts.
Using a clip remover, remove the 7 clips.
![]() |
Put protective tape around the bumper cover.
Detach the 6 claws and remove the bumper cover.
w/ Fog Light:
Disconnect the 2 fog light connectors.
w/ Headlight Cleaner System:
Disconnect the headlight cleaner hose.
| 8. REMOVE HEADLIGHT ASSEMBLY LH |
![]() |
Remove the 3 screws and bolt.
Disconnect the connectors and remove the headlight.
| 9. REMOVE NO. 1 HEADLIGHT BULB |
![]() |
Remove the socket cover.
Release the lock of the set spring and remove the bulb.
| 10. REMOVE FRONT TURN SIGNAL LIGHT BULB |
![]() |
Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.
Remove the bulb from the socket.
| 11. REMOVE CLEARANCE LIGHT BULB |
![]() |
Turn the bulb in the direction indicated by the arrow and pull to remove it.