INTERCOOLER (w/ EGR Cooler) > INSTALLATION |
| 1. INSTALL INTERCOOLER ASSEMBLY |
![]() |
Install a new gasket and the intake air connector with the 4 bolts.
![]() |
Install the intercooler with the 4 bolts.
![]() |
Tighten the 2 hose clamps of the No. 2 air hose.
![]() |
Tighten the 2 hose clamps of the No. 1 air hose.
| 2. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR |
![]() |
Install the sensor with the 2 bolts.
Attach the 2 clamps and connect the sensor connector.
| 3. INSTALL INTAKE AIR TEMPERATURE SENSOR |
Using a 22 mm deep socket wrench, install a new gasket and the IAT sensor.
![]() |
Connect the IAT sensor connector.
| 4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY |
![]() |
Install the engine cover with the 3 bolts and 2 nuts.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. PERFORM INITIALIZATION |
Perform initialization (Click here).