Home › ENGINE ยท 2KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE (w/ EGR System without EGR Cooler)

VACUUM REGULATING VALVE (w/ EGR System without EGR Cooler) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE VACUUM SWITCHING VALVE BRACKET


    G035434E01
  1. Disconnect the connector.

  1. Disconnect the vacuum hose from the 2 locations.

  1. Remove the 2 bolts and bracket (with E-VRV).