Home › ENGINE ยท 5L-E › ENGINE CONTROL SYSTEM › INTAKE AIR TEMPERATURE SENSOR

INTAKE AIR TEMPERATURE SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL INTAKE AIR TEMPERATURE SENSOR


A114269
  1. Install the sensor to the air cleaner hose.

  1. Connect the sensor connector and clamp.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


3. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.