TRANSFER INDICATOR SWITCH > ON-VEHICLE INSPECTION |
| 1. INSPECT TRANSFER INDICATOR SWITCH (for 4WD Position) |
![]() |
Measure the resistance of the switch.
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 2 | Pushed | Below 1 Ω |
| 1 - 2 | Not pushed | 10 kΩ or higher |
| 2. INSPECT TRANSFER INDICATOR SWITCH (for 4L Position) |
![]() |
Measure the resistance of the switch.
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 2 | Pushed | Below 1 Ω |
| 1 - 2 | Not pushed | 10 kΩ or higher |
| 3. INSPECT TRANSFER INDICATOR SWITCH (for Neutral Position) |
![]() |
Measure the resistance of the switch.
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 2 | Pushed | Below 1 Ω |
| 1 - 2 | Not pushed | 10 kΩ or higher |