DTC P0106 Manifold Absolute Pressure / Barometric Pressure Circuit Range / Performance Problem |
| DTC No. | DTC Detection Condition | Trouble Area |
| P0106 | Voltage output of the manifold absolute pressure sensor is out of the standard range (2 trip detection logic) | Manifold absolute pressure sensor |
| 1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0106) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON and turn the tester ON.
Enter the following menus: Powertrain / Engine / DTC.
Read the DTCs.
| Display (DTC output) | Proceed to |
| P0106 | A |
| P0106 and other DTCs | B |
|
| ||||
| A | ||
| ||