Home › BODY › ENGINE HOOD / DOOR › HOOD

HOOD > REASSEMBLY

for Preparation Click here



1. INSTALL HOOD AIR INTAKE SEAL


    B085156E05
  1. Install the air intake seal with the 18 clips.



2. INSTALL HOOD BULGE
  1. Clean the engine hood surface.

    1. Wipe off the stains with cleaner.

  1. If reusing hood bulge:
    Clean the hood bulge.

    1. Wipe off the stains with cleaner.



  1. Install the hood bulge.



      B085155E02
    1. Install the hood bulge with the 8 nuts.

      Torque:
      3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



3. INSTALL HOOD INSULATOR


    B111400E03
  1. Install the hood insulator with 15 clips.



4. INSTALL HEADLIGHT COVER TO HOOD SEAL


    B112877E02
  1. Install the hood seal with the 18 clips.



5. INSTALL HOOD TO RADIATOR SUPPORT SEAL


    B112878E02
  1. Install the support seal with the 6 clips.