Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING PANEL (for Automatic Air Conditioning System)

AIR CONDITIONING PANEL (for Automatic Air Conditioning System) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


E117035
  1. Using a screwdriver, detach the 6 claws and 4 clips.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect all the connectors and remove the panel.