AIR CONDITIONING PANEL (for Automatic Air Conditioning System) > DISASSEMBLY |
| 1. REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY |
![]() |
Remove the 4 screws and heater control and accessory.
| 2. REMOVE AIR CONDITIONER PANEL SUB-ASSEMBLY |
![]() |
Remove the 4 screws.
Detach the 4 claws and disconnect the heater control lower base.
| 3. REMOVE HEATER CONTROL BASE SUB-ASSEMBLY |
![]() |
Disconnect the cooler wire as shown in the illustration.
![]() |
Remove the 4 screws and heater control base.
| 4. REMOVE HEATER CONTROL KNOB |
![]() |
Remove the 12 knobs.
| 5. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY |
![]() |
Detach the 4 claws and heater control base cover.
Remove the air conditioning amplifier from the air conditioner panel sub-assembly.