Home › BODY › SEAT › SEAT HEATER SWITCH

SEAT HEATER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL SEAT HEATER SWITCH LH
  1. Attach the 2 claws to install the switch.



2. INSTALL SEAT HEATER SWITCH RH
  1. Attach the 2 claws to install the switch.



3. INSTALL SWITCH BASE


B084837E03
  1. Connect all connectors.

  1. Attach the 8 claws to install the switch base.



4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.