VISCOUS HEATER MAGNET CLUTCH (for Cold Area) > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
| 2. REMOVE FAN & GENERATOR V BELT |
| 3. DISCONNECT WATER BY-PASS HOSE |
![]() |
Using pliers, grip the claws of clip and side the clip and disconnect the water by-pass hose.
| 4. DISCONNECT HEATER WATER OUTLET HOSE |
| 5. REMOVE VISCOUS WITH MAGNET CLUTCH ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 2 bolts and viscous with magnet clutch heater assembly.