Home › ENGINE ยท 2KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE (w/ EGR System with EGR Cooler)

VACUUM REGULATING VALVE (w/ EGR System with EGR Cooler) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A135916
  1. Remove the 3 bolts, 2 nuts and engine cover.



3. REMOVE GAS FILTER


    A151136
  1. Disconnect the 2 vacuum hoses.

  1. Remove the bolt and gas filter with the gas filter bracket.



4. REMOVE ELECTRIC VACUUM REGULATING VALVE


    A151137
  1. Disconnect the connector.



    A151138
  1. Disconnect the 4 vacuum hoses.



    A151139
  1. Remove the 2 bolts and electric vacuum regulating valve.

    NOTICE:
    Do not remove the electric vacuum regulating valve.