Home › ENGINE ยท 1KD-FTV › FUEL › INJECTOR DRIVER (w/ EGR Cooler)

INJECTOR DRIVER (w/ EGR Cooler) > REMOVAL

for Preparation Click here



1. REMOVE CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE INJECTOR DRIVER


    A159223
  1. Disconnect the 3 connectors.

  1. Remove the 2 bolts and injector driver.



3. REMOVE INJECTOR DRIVER BRACKET


    A159224
  1. Remove the 3 screws and driver bracket.