FRONT BUMPER > INSTALLATION |
| 1. INSTALL FRONT BUMPER REINFORCEMENT EXTENSION LH (for 4WD and Pre-Runner) |
Attach the claws to install the reinforcement extension.
| 2. INSTALL FRONT BUMPER REINFORCEMENT EXTENSION RH (for 4WD and Pre-Runner) |
| 3. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
![]() |
Install the reinforcement with the 4 nuts.
| 4. INSTALL FRONT BUMPER SIDE SUPPORT LH |
![]() |
Attach the 2 claws to install the side support.
Install the screw.
| 5. INSTALL FRONT BUMPER SIDE SUPPORT RH |
| 6. INSTALL FRONT BUMPER COVER |
![]() |
Put protective tape around the bumper cover.
w/ Fog Light:
Connect the 2 fog light connectors.
w/ Headlight Cleaner System:
Connect the headlight cleaner hose.
Attach the 6 claws to install the bumper cover.
![]() |
Install the 7 clips and 2 bolts.
| 7. INSTALL ENGINE SIDE COVER SUB-ASSEMBLY LH (for 4WD and Pre-Runner) |
![]() |
Install the side cover with the 3 bolts and 2 clips.
| 8. INSTALL ENGINE SIDE COVER SUB-ASSEMBLY RH (for 4WD and Pre-Runner) |
| 9. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
![]() |
Install the splash shield with the 3 clips and 4 screws.
| 10. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
| 11. INSTALL FRONT NO. 1 WHEEL OPENING EXTENSION PAD (for 4WD and Pre-Runner) |
![]() |
Install the extension pad with the 2 screws.
| 12. INSTALL RADIATOR GRILLE ASSEMBLY |
![]() |
Put protective tape around the radiator grille.
Attach the 6 claws to install the radiator grille.
Install the 2 screws and 2 clips.