FRONT BUMPER > DISASSEMBLY |
| 1. REMOVE NO. 1 RADIATOR GRILLE SEAL |
![]() |
Remove the radiator grille seal.
| 2. REMOVE RADIATOR GRILLE MOULDING |
![]() |
Remove the 9 screws and radiator grille moulding.
| 3. REMOVE LOWER RADIATOR GRILLE MOULDING (for Type B) |
![]() |
Remove the 16 screws and lower radiator grille moulding.
| 4. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
![]() |
for Type A:
Using a screwdriver, detach the 3 claws and remove the emblem from the radiator grille.
![]() |
for Type B:
Using a screwdriver, detach the 3 claws and remove the emblem from the lower radiator grille moulding.
| 5. REMOVE RADIATOR GRILLE OR FRONT PANEL NAME PLATE (for 1GR-FE) |
![]() |
Remove the 2 spring nuts.
Using a heat light, heat the name plate.
| Item | Specified Condition |
| Name plate | 20 to 30°C (68 to 86°F) |
Remove the name plate.
| 6. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
![]() |
Remove the 3 bolts and fog light.
| 7. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
| 8. REMOVE TYPE1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System) |
![]() |
Extend the headlight washer nozzle.
![]() |
Detach the 2 claws and remove the washer nozzle.
| 9. REMOVE TYPE1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
| 10. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System) |
![]() |
Disconnect the headlight washer hose.
Remove the bolt.
Detach the 2 claws and remove the headlight washer actuator sub-assembly.
| 11. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
| 12. REMOVE LOWER RADIATOR GRILLE |
![]() |
w/ Headlight Cleaner System:
Detach the 4 clamps and remove the headlight cleaner hose.
![]() |
Detach the 17 claws and guide, and remove the lower radiator grille.
| 13. REMOVE FRONT BUMPER EXTENSION LH (w/ Over Fender) |
![]() |
Using a screwdriver, detach the 6 clips and remove the extension.
| 14. REMOVE FRONT BUMPER EXTENSION RH (w/ Over Fender) |