FRONT SEAT ASSEMBLY (for Power Seat) > INSTALLATION |
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the front seat assembly in the cabin.
Connect the connector under the seat.
Temporarily install the front seat assembly with the 4 bolts.
Operate the power seat switch (slide switch) to move the seat to the rearmost position.
![]() |
Tighten the bolts in the order shown in the illustration.
Operate the power seat switch (slide switch) to move the seat to the foremost position.
![]() |
Tighten the bolts in the order shown in the illustration.
| 2. INSTALL OUTER SEAT TRACK BRACKET COVER |
![]() |
Attach the 2 claws in the order shown in the illustration to install the cover.
| 3. INSTALL INNER SEAT TRACK BRACKET COVER |
![]() |
Attach the 2 claws in the order shown in the illustration to install the cover.
| 4. INSTALL FRONT SEAT HEADREST ASSEMBLY |
Install the headrest.
| 5. INSPECT FRONT SEAT ASSEMBLY |
Check the power seat operation (Click here).