Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Power Seat)

FRONT SEAT ASSEMBLY (for Power Seat) > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE FRONT SEAT HEADREST ASSEMBLY
  1. Remove the headrest.



2. REMOVE INNER SEAT TRACK BRACKET COVER


    B206605
  1. Operate the power seat switch (slide switch) to move the seat to the foremost position.

  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE OUTER SEAT TRACK BRACKET COVER


    B206604
  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE FRONT SEAT ASSEMBLY


    B207074
  1. Remove the 2 bolts.

  1. Operate the power seat switch (slide switch) to move the seat to the rearmost position.



    B207075
  1. Remove the 2 bolts.

  1. Operate the power seat switch (slide switch) and move the seat to the center position, operate the power seat switch (reclining switch) and move the seatback to the upright position, and operate the power seat switch (lifter switch) and move the seat to the uppermost position.

  1. Disconnect the connector under the seat.

  1. Remove the seat from the vehicle.

    NOTICE:
    Be careful not to damage the vehicle body.