RADIO RECEIVER > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE HEATER CONTROL KNOB |
![]() |
Remove the 3 control knobs.
| 3. REMOVE FRE/REC CONTROL KNOB |
![]() |
Remove the control knob.
| 4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Remove the screw <C>.
Detach the 6 claws and 4 clips.
| 5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Air Conditioning System) |
![]() |
Using a screwdriver, detach the 6 claws and 4 clips.
Disconnect all the connectors and remove the panel.
| 6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET |
![]() |
w/ Cassette Tape Player:
Remove the 4 screws.
Disconnect all the connectors and remove the radio receiver assembly with bracket.
![]() |
w/ CD Player:
Remove the 4 screws.
Disconnect all the connectors and remove the radio receiver assembly with bracket.
![]() |
w/ CD Player and Cassette Tape Player:
Remove the 4 screws.
Disconnect all the connectors and remove the radio receiver assembly with bracket.
| 7. REMOVE NO. 1 RADIO BRACKET |
![]() |
w/ Cassette Tape Player:
Remove the 4 screws, radio receiver panel RH and No. 1 radio bracket from the radio receiver.
![]() |
w/ CD Player:
Remove the 4 screws and No. 1 radio bracket from the radio receiver.
![]() |
w/ CD Player and Cassette Tape Player:
Remove the 4 screws and No. 1 radio bracket from the radio receiver.
| 8. REMOVE NO. 2 RADIO BRACKET |
![]() |
w/ Cassette Tape Player:
Remove the 4 screws, radio receiver panel LH and No. 2 radio bracket from the radio receiver.
![]() |
w/ CD Player:
Remove the 4 screws and No. 2 radio bracket from the radio receiver.
![]() |
w/ CD Player and Cassette Tape Player:
Remove the 4 screws and No. 2 radio bracket from the radio receiver.