Home › BODY ELECTRICAL › WIPER AND WASHER › HEADLIGHT CLEANER SWITCH

HEADLIGHT CLEANER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY


    E175026E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (B) - 4 (L)
    Headlight cleaner switch off
    10 kΩ or higher
    3 (B) - 4 (L)
    Headlight cleaner switch on
    Below 1 Ω

    If the result is not as specified, there may be a malfunction in the headlight cleaner switch.