STARTER (for 1.4 kW Type) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT FENDER SEAL |
Remove the 5 clips and seal.
| 3. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transmission) |
![]() |
Remove the oil dipstick.
Remove the 2 bolts and oil filler tube.
Remove the O-ring from the oil filler tube.
| 4. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission) |
![]() |
Remove the 2 bolts and disconnect the release cylinder assembly.
| 5. REMOVE STARTER ASSEMBLY |
Disconnect the starter connector.
Remove the terminal cap.
Remove the nut and disconnect the starter wire.
Remove the 2 bolts and starter.