REAR AIRBAG SENSOR > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE REAR SEAT ASSEMBLY |
Remove the rear seat assembly (Click here).
| 3. REMOVE REAR DOOR SCUFF PLATE LH |
![]() |
Using a screwdriver, detach the 7 claws.
Using a clip remover, detach the 3 clips and remove the scuff plate.
| 4. REMOVE REAR DOOR OPENING TRIM LH |
| 5. REMOVE LOWER QUARTER TRIM PANEL LH |
![]() |
Using a screwdriver, detach the claw.
Using a clip remover, detach the 3 clips and remove the trim panel.
| 6. REMOVE REAR AIRBAG SENSOR LH |
![]() |
Remove the bolt and rear airbag sensor.
Disconnect the connector.