Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 1GR-FE CHARGING

1GR-FE CHARGING > SERVICE DATA



Generator
Rated output
12 V 80 A
Voltage regulator
Regulating voltage
13.2 to 14.0 V
Battery
Standard specific gravity
1.25 to 1.29 at 20°C (68°F)
Charging circuit without load
Standard amperage
(when engine speed at 2,000 rpm)
10 A or less
Standard voltage
(when engine speed at 2,000 rpm)
13.2 to 14.8 V
Charging circuit with load
Standard amperage
30 A or higher
Generator rotor assembly
Standard resistance
Slip rings
1.7 to 2.1 Ω at 20 °C (68°F)
Generator rotor assembly
Standard slip ring diameter
14.2 to 14.4 mm (0.559 to 0.567 in.)
Minimum slip ring diameter
14.0 mm (0.551 in.)
Generator brush holder assembly
Standard exposed length
9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length
4.5 mm (0.177 in.)