Home › ENGINE ยท 2KD-FTV › FUEL › INJECTOR DRIVER

INJECTOR DRIVER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.



2. REMOVE INJECTOR DRIVER (w/o EGR Cooler)


  1. for LHD:



      G038052E04
    1. Disconnect the 2 connectors.

    2. Remove the 2 bolts and injector driver.



  1. for RHD:



      A098862E01
    1. Disconnect the 2 connectors.

    2. Remove the 2 bolts and injector driver.



3. REMOVE INJECTOR DRIVER (w/ EGR Cooler)


  1. for LHD:



      A224467
    1. Disconnect the 3 connectors.

    2. Remove the 2 bolts and injector driver.



  1. for RHD:



      A211899
    1. Disconnect the 3 connectors.

    2. Remove the 2 bolts and injector driver.



4. REMOVE INJECTOR DRIVER BRACKET (w/o EGR Cooler)


    G038053E02
  1. for LHD:
    Remove the 3 screws and injector driver bracket.



    A098863E01
  1. for RHD:
    Remove the 3 screws and injector driver bracket.



5. REMOVE INJECTOR DRIVER BRACKET (w/ EGR Cooler)


    A224468
  1. for LHD:
    Remove the 3 screws and injector driver bracket.



    A211900
  1. for RHD:
    Remove the 3 screws and injector driver bracket.