Home › ENGINE ยท 5L-E › COOLING › THERMOSTAT

THERMOSTAT > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE UNDER COVER (for 4WD)


A121844
  1. Remove the 8 bolts and under cover.



2. DRAIN ENGINE COOLANT

NOTICE:
Do not remove the radiator reservoir cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.



    A114241
  1. Remove the reservoir cap and, using a wrench, remove the vent plug.



  1. Loosen the cylinder block drain cock plug and the radiator drain cock plug and then drain the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



    A114242E01



3. DISCONNECT RADIATOR HOSE INLET


4. REMOVE WATER OUTLET


    A114250
  1. Remove the 3 bolts, water outlet and gasket.



5. REMOVE THERMOSTAT
  1. Remove the thermostat with gasket.