Home › BRAKE › BRAKE › VACUUM PUMP (for 5L-E)

VACUUM PUMP (for 5L-E) > INSPECTION

for Preparation Click here



1. CHECK OPERATION BRAKE VACUUM CHECK VALVE ASSEMBLY


    C111352E01
  1. Check that air flows from the hose side to the pump side.

  1. Check that air does not flow from the pump side to the hose side.

  1. If necessary, replace the check valve assembly.



2. CHECK VACUUM PUMP CASE
  1. Inspect the inside surface on the vacuum pump case for scoring.

  1. If necessary, replace the vacuum pump assembly.