Home › TRANSMISSION ยท A750F AUTOMATIC TRANSMISSION › ELECTRONIC CONTROLLED AUTOMATIC TRANSMISSION SYSTEM (for 1GR-FE)

ELECTRONIC CONTROLLED AUTOMATIC TRANSMISSION SYSTEM (for 1GR-FE) > TERMINALS OF ECM

for Preparation Click here



ECM

G036662E29

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the ECM terminals.


Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
L4 (E17-13) - E1 (E17-1)
G-W - BR
L4 shift position switch signal
Ignition switch ON and shift lever on L4
Below 1 V
L4 (E17-13) - E1 (E17-1)
G-W - BR
L4 shift position switch signal
Ignition switch ON and shift lever not on L4
11 to 14 V
TFN (E16-25) - E1 (E17-1)
W-G - BR
N shift position switch signal
Ignition switch ON and shift lever on N
Below 1 V
TFN (E16-25) - E1 (E17-1)
W-G - BR
N shift position switch signal
Ignition switch ON and shift lever not on N
11 to 14 V
L (E13-9) - E1 (E17-1)
GR-L - BR
L shift position switch signal
Ignition switch ON and shift lever on L
11 to 14 V
L (E13-9) - E1 (E17-1)
GR-L - BR
L shift position switch signal
Ignition switch ON and shift lever not on L
Below 1 V
2 (E13-10) - E1 (E17-1)
G-R - BR
2 shift position switch signal
Ignition switch ON and shift lever on 2 and L
11 to 14 V
2 (E13-10) - E1 (E17-1)
G-R - BR
2 shift position switch signal
Ignition switch ON and shift lever not on 2 and L
Below 1 V
R (E13 -11) - E1 (E17-1)
R-Y - BR
R shift position switch signal
Ignition switch ON and shift lever on R
11 to 14 V
R (E13 -11) - E1 (E17-1)
R-Y - BR
R shift position switch signal
Ignition switch ON and shift lever not on R
Below 1 V
D (E13-21) - E1 (E17-1)
G-Y - BR
D shift position switch signal
Ignition switch ON and shift lever on D or 4
11 to 14 V
D (E13-21) - E1 (E17-1)
G-Y - BR
D shift position switch signal
Ignition switch ON and shift lever not on D or 4
Below 1 V
3 (E13-19) - E1 (E17-1)
L - BR
3 shift position switch signal
Ignition switch ON and shift lever on 3
11 to 14 V
3 (E13-19) - E1 (E17-1)
L - BR
3 shift position switch signal
Ignition switch ON and shift lever not on 3
Below 1 V
4 (E13-20) - E1 (E17-1)
G-O - BR
4 shift position switch signal
Ignition switch ON and shift lever on 4
11 to 14 V
4 (E13-20) - E1 (E17-1)
G-O - BR
4 shift position switch signal
Ignition switch ON and shift lever not on 4
Below 1 V
STP (E14-15) - E1 (E17-1)
G-W - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
STP (E14-15) - E1 (E17-1)
G-W - BR
Stop light switch signal
Brake pedal is released
Below 1.5 V
SLU+ (E16-15) - SLU- (E16-14)
L - W
SLU solenoid signal
4th (lock-up) or 5th (lock-up) gear
Pulse generation
(see waveform 1)
S2 (E16-10) - E1 (E17-1)
W-L - BR
S2 solenoid signal
2nd or 3rd gear
11 to 14 V
S2 (E16-10) - E1 (E17-1)
W-L - BR
S2 solenoid signal
1st, 4th or 5th gear
Below 1 V
S1 (E16-11) - E1 (E17-1)
GR - BR
S1 solenoid signal
1st or 2nd gear
11 to 14 V
S1 (E16-11) - E1 (E17-1)
GR - BR
S1 solenoid signal
3rd, 4th or 5th gear
Below 1 V
SLT+ (E16-13) - SLT- (E16-12)
G-Y - L-B
SLT solenoid signal
Engine is idling
Pulse generation
(see waveform 2)
SR (E16-9) - E1 (E17-1)
G - BR
SR solenoid signal
5th gear
11 to 14 V
SR (E16-9) - E1 (E17-1)
G - BR
SR solenoid signal
1st gear
Below 1 V
SL2+ (E16-17) - SL2- (E16-16)
G-B - G-R
SL2 solenoid signal
Engine is idling
Pulse generation
(see waveform 3)
SL1+ (E16-19) - SL1- (E16-18)
G-W - P-L
SL1 solenoid signal
Engine is idling
Pulse generation
(see waveform 4)
THO1 (E16-24) - E2 (E15-28)
W-R - BR
No. 1 ATF temperature sensor signal
No. 1 ATF temperature: 115°C (239°F) or more
Below 1.5 V
THO2 (E16-32) - E2 (E15-28)
B-Y - BR
No. 2 ATF temperature sensor signal
No. 2 ATF temperature: 115°C (239°F) or more
Below 1.5 V
SP2+ (E16-34) - SP2- (E16-26)
V - P
Speed sensor (SP2) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 5)
NT+ (E16-35) - NT- (E16-27)
L - Y
Speed sensor (NT) signal
Engine is idling
Pulse generation
(see waveform 6)
NSW (E16-8) - E1 (E17-1)
L-Y - BR
PNP switch signal
Ignition switch ON and shift lever on P or N
Below 2 V
NSW (E16-8) - E1 (E17-1)
L-Y - BR
PNP switch signal
Ignition switch ON and shift lever not on P or N
11 to 14 V

Waveform 1 (Reference)
G023426E03
Item
Content
Symbols (Terminal No.)
SLU+ (E16-15) - SLU- (E16-14)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
4th (lock-up) or 5th (lock-up) gear

Waveform 2 (Reference)
G023426E03
Item
Content
Symbols (Terminal No.)
SLT+ (E16-13) - SLT- (E16-12)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
Engine is idling

Waveform 3 (Reference)
G023426E03
Item
Content
Symbols (Terminal No.)
SL2+ (E16-17) - SL2- (E16-16)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
Engine is idling

Waveform 4 (Reference)
G023426E03
Item
Content
Symbols (Terminal No.)
SL1+ (E16-19) - SL1- (E16-18)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
Engine is idling

Waveform 5 (Reference)
G020664E03
Item
Content
Symbols (Terminal No.)
SP2+ (E16-34) - SP2- (E16-26)
Tool Setting
2 V/DIV., 2 msec./DIV.
Condition
Vehicle speed 20 km/h (12 mph)

Waveform 6 (Reference)
G020663E02
Item
Content
Symbols (Terminal No.)
NT+ (E16-35) - NT- (E16-27)
Tool Setting
1 V/DIV., 2 msec./DIV.
Condition
Engine is idling