Home › TRANSMISSION ยท A343F AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > TERMINALS OF ECM

for Preparation Click here



C115871E08

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.


Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
NSW (E9-30) - E1 (E12-3)
L-Y - BR
Park/neutral position switch signal
Ignition switch ON and shift lever on P or N
Below 3 V
NSW (E9-30) - E1 (E12-3)
L-Y - BR
Park/neutral position switch signal
Ignition switch ON and shift lever not on P or N
9 to 14 V
STA (E9-12) - E1 (E12-3)
B-Y - BR
Starter signal
Cranking
6 V or more
R (E10 -11) - E1 (E12-3)
R-Y - BR
R shift position switch signal
Ignition switch ON and transfer shift lever on R
7.5 to 14 V
R (E10 -11) - E1 (E12-3)
R-Y - BR
R shift position switch signal
Ignition switch ON and transfer shift lever not on R
Below 1.5 V
L (E10-9) - E1 (E12-3)
G-R - BR
L shift position switch signal
Ignition switch ON and transfer shift lever on L
7.5 to 14 V
L (E10-9) - E1 (E12-3)
G-R - BR
L shift position switch signal
Ignition switch ON and transfer shift lever not on L
Below 1.5 V
2 (E10-10) - E1 (E12-3)
L - BR
2 shift position switch signal
Ignition switch ON and transfer shift lever on 2
7.5 to 14 V
2 (E10-10) - E1 (E12-3)
L - BR
2 shift position switch signal
Ignition switch ON and transfer shift lever not on 2
Below 1.5 V
3 (E10-19) - E1 (E12-3)
G-O - BR
3 shift position switch signal
Ignition switch ON and transfer shift lever on 3
7.5 to 14 V
3 (E10-19) - E1 (E12-3)
G-O - BR
3 shift position switch signal
Ignition switch ON and transfer shift lever not on 3
Below 1.5 V
NC0+ (E11-34) - NC0- (E11-26)
V - P
Speed sensor (NC0) signal
Engine is idling
Pulse generation
(see waveform 1)
SP2+ (E11-35) - SP2- (E11-27)
G - R
Speed sensor (SP2) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 2)
STP (E10-4) - E1 (E12-3)
G-W - BR
Stop light switch signal
Ignition switch ON and brake pedal is depressed
7.5 to 14 V
STP (E10-4) - E1 (E12-3)
G-W - BR
Stop light switch signal
Ignition switch ON and brake pedal is released
Below 1.5 V
S1 (E11-9) - E1 (E12-3)
B-W - BR
S1 solenoid signal
Ignition switch ON
9 to 14 V
S1 (E11-9) - E1 (E12-3)
B-W - BR
S1 solenoid signal
1st or 2nd gear
9 to 14 V
S1 (E11-9) - E1 (E12-3)
B-W - BR
S1 solenoid signal
3rd or 4th gear
Below 1.5 V
S2 (E11-8) - E1 (E12-3)
B-R - BR
S2 solenoid signal
Ignition switch ON
Below 1.5 V
S2 (E11-8) - E1 (E12-3)
B-R - BR
S2 solenoid signal
2nd or 3rd gear
9 to 14 V
S2 (E11-8) - E1 (E12-3)
B-R - BR
S2 solenoid signal
1st or 4th gear
Below 1.5 V
SL (E11-11) - E1 (E12-3)
L-Y - BR
SL solenoid signal
Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
Pulse generation
(see waveform 3)
SL (E11-11) - E1 (E12-3)
L-Y - BR
SL solenoid signal
Vehicle driving under lock-up condition
9 to 14 V
SLT+ (E11-12) - SLT- (E11-13)
B-L - B-Y
SLT solenoid signal
Ignition switch ON
Below 3 V
SLT+ (E11-12) - SLT- (E11-13)
B-L - B-Y
SLT solenoid signal
Engine is idling
Pulse generation
(see waveform 4)
SPD (E10-8) - E1 (E12-3)
V-R - BR
Speed signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 5)
THOC (E12-22) - E2 (E12-28)
W-L - BR
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
SIL (E10-13) - E1 (E12-3)
R-Y - BR
Terminal SIL of DLC3
Connect intelligent tester to DLC3
Pulse generation
WFSE (E10-35) - E1 (E12-3)
W - BR
Terminal SIL of DLC3
Ignition switch ON
9 to 14 V
L4 (E9-11) - E1 (E12-3)
G-W - BR
L4 shift position switch signal
Ignition switch ON and transfer shift lever on L4
Below 1.5 V
L4 (E9-11) - E1 (E12-3)
G-W - BR
L4 shift position switch signal
Ignition switch ON and transfer shift lever not on L4
7.5 to 14 V
TFN (E9-23) - E1 (E12-3)
W-G - BR
N shift position switch signal
Ignition switch ON and transfer shift lever on N
Below 1.5 V
TFN (E9-23) - E1 (E12-3)
W-G - BR
N shift position switch signal
Ignition switch ON and transfer shift lever not on N
7.5 to 14 V

Waveform 1 (Reference)
C170570E01
Item
Content
Symbols (Terminal No.)
NC0+ (E11-34) - NC0- (E11-26)
Tool Setting
5 V/DIV., 0.5 msec./DIV.
Condition
Engine is idling (P or N position)

Waveform 2 (Reference)
C170571E01
Item
Content
Symbols (Terminal No.)
SP2+ (E11-35) - SP2- (E11-27)
Tool Setting
2 V/DIV., 2 msec./DIV.
Condition
Vehicle speed 20 km/h (12 mph)

Waveform 3 (Reference)
C170572E01
Item
Content
Symbols (Terminal No.)
SL (E11-11) - E1 (E12-3)
Tool Setting
10 V/DIV., 100 msec./DIV.
Condition
Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)

Waveform 4 (Reference)
C170573E01
Item
Content
Symbols (Terminal No.)
SLT+ (E11-12) - SLT- (E11-13)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
Engine is idling

Waveform 5 (Reference)
C170574E01
Item
Content
Symbols (Terminal No.)
SPD (E10-8) - E1 (E12-3)
Tool Setting
5 V/DIV., 20 msec./DIV.
Condition
Vehicle speed 20 km/h (12 mph)