ELECTRONIC CONTROLLED AUTOMATIC TRANSMISSION SYSTEM (for 1GR-FE) > DIAGNOSIS SYSTEM |
| DESCRIPTION |
![]() ![]() |
| NORMAL MODE AND CHECK MODE |
| 2 TRIP DETECTION LOGIC |
| FREEZE FRAME DATA |
![]() |
| CHECK MIL |
![]() |
The MIL illuminates when the ignition switch is turned ON and the engine is not running.
When the engine is started, check that the MIL turns OFF.
If the lamp remains illuminated, the diagnosis system has detected a malfunction or abnormality in the system.
| ALL READINESS |
For this vehicle, using the intelligent tester allows readiness codes corresponding to all DTCs to be read. When diagnosis (normal or malfunctioning) has been complete, readiness codes are set.