VANE PUMP (for 5L-E) > INSTALLATION |
| 1. INSTALL VANE PUMP ASSEMBLY |
![]() |
Install the vane pump with the 2 bolts and nut.
| 2. INSTALL VANE PUMP PULLEY |
![]() |
Using SST, install the vane pump pulley to the vane pump.
| 3. CONNECT PRESSURE FEED TUBE ASSEMBLY |
Install a new gasket to the pressure feed tube.
![]() |
Connect the pressure feed tube to the vane pump with the union bolt.
| 4. CONNECT OIL RESERVOIR TO NO. 1 PUMP HOSE |
![]() |
Connect the hose to the vane pump with the clip.
| 5. INSTALL FAN & GENERATOR V BELT (w/o Air Conditioning System) |
![]() |
Install the V belt.
Using a bar, adjust the tension of the V belt.
Tighten the bolts A and B.
Check the deflection of the V belt (Click here).
| 6. INSTALL FAN & GENERATOR V BELT (w/ Air Conditioning System) |
![]() |
Install the V belt.
Tightening the bolt C, adjust the deflection of the V belt.
Tighten the bolts A and B.
Check the deflection of the V belt (Click here).
| 7. ADD POWER STEERING FLUID |
| 8. BLEED POWER STEERING FLUID |
Bleed power steering fluid (Click here).
| 9. CHECK FOR POWER STEERING FLUID LEAKS |