Home › STEERING › POWER STEERING › VANE PUMP (for 5L-E)

VANE PUMP (for 5L-E) > REMOVAL

for Preparation Click here



1. DRAIN POWER STEERING FLUID


2. SEPARATE FAN & GENERATOR V BELT (w/o Air Conditioning System)


    A115631E01
  1. Loosen the bolts A and B, and remove the V belt.



3. SEPARATE FAN & GENERATOR V BELT (w/ Air Conditioning System)


    A115632E01
  1. Loosen the bolts A and B.

  1. Loosen the adjusting bolt C, and remove the V belt.



4. DISCONNECT OIL RESERVOIR TO NO. 1 PUMP HOSE


    C123343
  1. Slide the clip and disconnect the oil hose.



5. DISCONNECT PRESSURE FEED TUBE ASSEMBLY


    C123344
  1. Remove the union bolt and gasket and disconnect the pressure feed tube.



6. REMOVE VANE PUMP PULLEY


    C123345E01
  1. Using SST, remove the nut and vane pump pulley.

    SST
    09960-10010   (09962-01000, 09963-01000)



7. REMOVE VANE PUMP ASSEMBLY


    C123346
  1. Remove the 2 bolts, nut and vane pump.