Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM

ENGINE IMMOBILISER SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Engine immobiliser system: 
Symptom
Suspected Area
See page
Engine does not start
1. ECU power source circuit
Click here
2. ECD system (1KD-FTV)
Click here
3. ECD system (2KD-FTV)
Click here
4. SFI system (1TR-FE)
Click here
5. SFI system (2TR-FE)
Click here
6. SFI system (1GR-FE)
Click here