Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WASHER MOTOR

FRONT WASHER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    B210369
  1. Install the windshield washer motor and pump.

  1. Connect the connector.

  1. Connect the washer hose.



2. FILL WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID
  1. Fill the washer jar with washer fluid.



3. INSTALL FRONT FENDER LINER LH


B206027
  1. Install the splash shield with the 3 clips and 4 screws.