FRONT WASHER MOTOR > REMOVAL |
| 1. REMOVE FRONT FENDER LINER LH |
![]() |
Using a clip remover, remove the 2 clips.
Remove the 3 bolts and engine side cover.
| 2. DRAIN WASHER FLUID |
![]() |
Disconnect the washer hose from the windshield washer motor and pump, and drain the washer fluid.
| 3. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
![]() |
Disconnect the connector.
Remove the windshield washer motor and pump.