Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING UNIT (for Automatic Air Conditioning System)

AIR CONDITIONING UNIT (for Automatic Air Conditioning System) > DISASSEMBLY

for Preparation Click here



1. REMOVE BLOWER ASSEMBLY


    E175031
  1. Remove the 2 screws.

  1. Detach the blower assembly from the air conditioning radiator assembly.



2. REMOVE AIR MIX DAMPER SERVO SUB-ASSEMBLY


    E173249
  1. Remove the 3 screws and damper servo.



3. REMOVE MODE DAMPER SERVO SUB-ASSEMBLY


E173247
  1. Remove the 3 screws and damper servo.



4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


    E173260
  1. Remove the screw and heater radiator.



5. REMOVE COOLER EXPANSION VALVE


    E111000
  1. Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts.

  1. Remove the cooler expansion valve and 2 O-rings from the cooler evaporator.



6. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    E173252
  1. Remove the 4 screws.

  1. Detach the 2 claws and remove the cover.



    E173253
  1. Detach the temperature sensor clamp.

  1. Remove the temperature sensor and cooler evaporator from the case.



7. REMOVE EVAPORATOR TEMPERATURE SENSOR


    E173254
  1. Disconnect the temperature sensor clamp from the cooler evaporator and remove the temperature sensor.