Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › SPEED SENSOR

SPEED SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL O/D DIRECT CLUTCH SPEED SENSOR


G034531E01
  1. Coat a new O-ring with ATF and install it to the sensor.



    G034266E01
  1. Install the sensor with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.



2. INSTALL NO. 2 VEHICLE SPEED SENSOR


G034531E01
  1. Coat a new O-ring with ATF and install it to the sensor.



    C122052E01
  1. Install the sensor with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.



3. INSTALL SPEEDOMETER SENSOR


C122055E01
  1. Coat a new O-ring with ATF and install it to the sensor.



    C122054E04
  1. Install the speedometer driven gear to the sensor.

    HINT:
    Insert the gear so that the gear's grooves align with the protrusions inside the sensor.



    C122053E01
  1. Install the sensor assembly wit the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.