FRONT BUMPER > DISASSEMBLY |
| Item | Specified Condition |
| Finish plate, name plate | 20 to 30°C (68 to 86°F) |
| 1. REMOVE NO. 1 RADIATOR GRILLE RETAINER |
Remove the 5 screws and retainer.
| 2. REMOVE RADIATOR GRILLE FINISH PLATE LH (w/ Plated Moulding) |
![]() |
Using a heat light, heat the finish plate.
Pull off the finish plate by cutting the double-sided tape with a knife.
Remove the finish plate.
| 3. REMOVE RADIATOR GRILLE FINISH PLATE RH (w/ Plated Moulding) |
| 4. REMOVE RADIATOR GRILLE EMBLEM |
![]() |
Using a screwdriver, detach the 3 claws and remove the emblem from the radiator grille.
| 5. REMOVE FOG LIGHT ASSEMBLY LH WITH BRACKET (w/ Fog Light) |
![]() |
Remove the 2 bolts and fog light.
| 6. REMOVE FOG LIGHT ASSEMBLY RH WITH BRACKET (w/ Fog Light) |
![]() |
Remove the 2 bolts and fog light.
| 7. REMOVE FRONT BUMPER EXTENSION LH (w/ Over Fender) |
![]() |
Using a screwdriver, detach the 6 retainers and remove the extension.
| 8. REMOVE FRONT BUMPER EXTENSION RH (w/ Over Fender) |
| 9. REMOVE FRONT BUMPER HOLE COVER LH |
Using a screwdriver, remove the clip and hole cover.
| 10. REMOVE FRONT BUMPER HOLE COVER RH |
| 11. REMOVE NO. 2 FRONT BUMPER EXTENSION INSERT LH |
Remove the screw and extension insert.
| 12. REMOVE NO. 2 FRONT BUMPER EXTENSION INSERT RH |
Remove the screw and extension insert.