FRONT BUMPER > REASSEMBLY |
| Item | Specified Condition |
| Radiator grille, finish plate and name plate | 20 to 30°C (68 to 86°F) |
| 1. INSTALL NO. 2 FRONT BUMPER EXTENSION INSERT LH |
Install the extension insert with the screw.
| 2. INSTALL NO. 2 FRONT BUMPER EXTENSION INSERT RH |
Install the extension insert with the screw.
| 3. INSTALL FRONT BUMPER HOLE COVER LH |
Install the hole cover with the clip.
| 4. INSTALL FRONT BUMPER HOLE COVER RH |
Install the hole cover with the clip.
| 5. INSTALL FRONT BUMPER GARNISH (w/ Garnish) |
![]() |
Install the garnish with the 10 retainers.
![]() |
Install the 3 retainers.
| 6. INSTALL FRONT BUMPER EXTENSION LH (w/ Over Fender) |
![]() |
Install the extension with the 6 retainers.
| 7. INSTALL FRONT BUMPER EXTENSION RH (w/ Over Fender) |
| 8. INSTALL FOG LIGHT ASSEMBLY LH WITH BRACKET (w/ Fog Light) |
![]() |
Install the fog light with the 2 bolts.
| 9. INSTALL FOG LIGHT ASSEMBLY RH WITH BRACKET |
![]() |
Install the fog light with the 2 bolts.
| 10. INSTALL RADIATOR GRILLE EMBLEM |
![]() |
Attach the 3 claws to install the emblem.
| 11. INSTALL RADIATOR GRILLE NAME PLATE (for 1GR-FE) |
Clean the grille surface.
Using a heat light, heat the grille surface.
Remove the double-sided tape from the grille.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new name plate.
Remove the peeling paper from the name plate.
Install the name plate to the radiator grille.
Securely attach 2 new spring nuts to the name plate.
| 12. INSTALL RADIATOR GRILLE FINISH PLATE LH (w/ Plated Moulding) |
Clean the grille surface:
Using a heat light, heat the grille surface.
Remove the double-sided tape from the grille.
Wipe off the stains with cleaner.
If reusing the finish plate:
Clean the finish plate.
Using a heat light, heat the finish plate.
Remove the double-sided tape from the finish plate.
Wipe off the stains with cleaner.
![]() |
Apply new double-sided tape to the finish plate as shown in the illustration.
Remove the peeling paper from the finish plate.
Install the finish plate to the radiator grille.
| 13. INSTALL RADIATOR GRILLE FINISH PLATE RH (w/ Plated Moulding) |
| 14. INSTALL NO. 1 RADIATOR GRILLE RETAINER |
Install the retainer with the 5 screws.