Using SST and a dial indicator, measure the direct clutch pack clearance while applying and releasing compressed air (186 to 206 kPa (1.9 to 2.1 kgf/cm2, 27 to 30 psi)).
- SST
- 09350-30020
(09350-06120)
- Pack clearance:
- 0.40 to 0.70 mm (0.016 to 0.028 in.)
If the pack clearance is not as specified, parts may have been assembled incorrectly. Check and reassemble again.
If the pack clearance is still not as specified, select another flange.
- HINT:
- There are 8 different flange thicknesses.
- Standard flange thickness:
No.
| Specified Condition
| No.
| Specified Condition
|
53
| 3.3 mm (0.130 in.)
| 57
| 3.7 mm (0.146 in.)
|
54
| 3.4 mm (0.134 in.)
| 58
| 3.8 mm (0.150 in.)
|
55
| 3.5 mm (0.138 in.)
| 60
| 4.0 mm (0.157 in.)
|
56
| 3.6 mm (0.142 in.)
| 62
| 4.2 mm (0.165 in.)
|