Home › ENGINE ยท 1KD-FTV › ENGINE CONTROL SYSTEM › DIESEL THROTTLE BODY (w/ EGR Cooler)

DIESEL THROTTLE BODY (w/ EGR Cooler) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A135916
  1. Remove the 3 bolts, 2 nuts and engine cover.



3. REMOVE INTERCOOLER ASSEMBLY WITH INTAKE AIR CONNECTOR


    A149802
  1. Detach the 2 clamps.

  1. Disconnect the vacuum hose from the manifold absolute pressure sensor.

  1. Disconnect the IAT sensor connector and manifold absolute diesel pressure sensor connector.



    A135918
  1. Loosen the 2 clamps.



    A135919
  1. Remove the 4 bolts and intercooler.



4. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    A135920
  1. Disconnect the 2 connectors.



    A135921
  1. Remove the 2 bolts, 2 nuts, throttle body and gasket.