Home › TRANSMISSION ยท A750F AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM (for 1KD-FTV)

AUTOMATIC TRANSMISSION SYSTEM (for 1KD-FTV) > TERMINALS OF ECU

for Preparation Click here


HINT:
Each ECU terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration below as a reference for the ECU terminals.


ECM

C115871E10


Terminal No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
E5-6 (NSW) - E7-7 (E1)
L-Y - BR
Park/neutral position switch signal
Ignition switch ON and shift lever on P or N
11 to 14 V
E5-6 (NSW) - E7-7 (E1)
L-Y - BR
Park/neutral position switch signal
Ignition switch ON and shift lever not on P or N
Below 3 V
E6-15 (STP) - E7-7 (E1)
G-W - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
E6-15 (STP) - E7-7 (E1)
G-W - BR
Stop light switch signal
Brake pedal is released
Below 1.5 V
E8-18 (VC) - E7-7 (E1)
R-W - BR
Power source of sensor (specific voltage)
Ignition switch ON
4.5 to 5.5 V
E5-1 (+B) - E7-7 (E1)
B - BR
Power source of ECM
Ignition switch ON
11 to 14 V
E6-22 (CAN+) - E7-7 (E1)
V - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 7)
E6-21 (CAN-) - E7-7 (E1)
P - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 8)

TCM

E139229E01


Terminal No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
T17-5 (BATT) - T19-1 (E1)
L - BR
Battery (for measuring battery voltage and for TCM memory)
Always
11 to 14 V
T19-12 (NSW) - T19-1 (E1)
L-Y - BR
Park/neutral position switch signal
Ignition switch ON and shift lever on P or N
11 to 14 V
T19-12 (NSW) - T19-1 (E1)
L-Y - BR
Park/neutral position switch signal
Ignition switch ON and shift lever not on P or N
Below 3 V
T19-11 (STA) - T19-1 (E1)
B-Y - BR
Starter signal
Cranking
6 V or higher
T18-9 (R) - T19-1 (E1)
R-Y - BR
R shift position switch signal
Ignition switch ON and shift lever on R
11 to 14 V
T18-9 (R) - T19-1 (E1)
R-Y - BR
R shift position switch signal
Ignition switch ON and shift lever not on R
Below 1.5 V
T18-8 (D) - T19-1 (E1)
G-Y - BR
D shift position switch signal
Ignition switch ON and shift lever on D or 4
11 to 14 V
T18-8 (D) - T19-1 (E1)
G-Y - BR
D shift position switch signal
Ignition switch ON and shift lever not on D or 4
Below 1.5 V
T18-13 (4) - T19-1 (E1)
G-O - BR
4 shift position switch signal
Ignition switch ON and shift lever on 4
11 to 14 V
T18-13 (4) - T19-1 (E1)
G-O - BR
4 shift position switch signal
Ignition switch ON and shift lever not on 4
Below 1.5 V
T18-12 (3) - T19-1 (E1)
L - BR
3 shift position switch signal
Ignition switch ON and shift lever on 3
11 to 14 V
T18-12 (3) - T19-1 (E1)
L - BR
3 shift position switch signal
Ignition switch ON and shift lever not on 3
Below 1.5 V
T18-11 (2) - T19-1 (E1)
G-R - BR
2 shift position switch signal
Ignition switch ON and shift lever on 2
11 to 14 V
T18-11 (2) - T19-1 (E1)
G-R - BR
2 shift position switch signal
Ignition switch ON and shift lever not on 2
Below 1.5 V
T18-10 (L) - T19-1 (E1)
GR-L - BR
L shift position switch signal
Ignition switch ON and shift lever on L
11 to 14 V
T18-10 (L) - T19-1 (E1)
GR-L - BR
L shift position switch signal
Ignition switch ON and shift lever not on L
Below 1.5 V
T19-18 (S1) - T19-1 (E1)
GR - BR
S1 solenoid signal
1st or 2nd gear
11 to 14 V
T19-18 (S1) - T19-1 (E1)
GR - BR
S1 solenoid signal
3rd, 4th or 5th gear
Below 1.5 V
T19-17 (S2) - T19-1 (E1)
W-L - BR
S2 solenoid signal
2nd or 3rd gear
11 to 14 V
T19-17 (S2) - T19-1 (E1)
W-L - BR
S2 solenoid signal
1st, 4th or 5th gear
Below 1.5 V
T19-16 (SR) - T19-1 (E1)
G - BR
SR solenoid signal
5th gear
11 to 14 V
T19-16 (SR) - T19-1 (E1)
G - BR
SR solenoid signal
1st gear
Below 1.5 V
T19-9 (SL1+) - T19-8 (SL1-)
GR - V
SL1 solenoid signal
Engine is idling
Pulse generation
(see waveform 1)
T19-7 (SL2+) - T19-6 (SL2-)
W - R-W
SL2 solenoid signal
Engine is idling
Pulse generation
(see waveform 2)
T19-20 (SLT+) - T19-19 (SLT-)
G-Y - L-B
SLT solenoid signal
Engine is idling
Pulse generation
(see waveform 3)
T19-22 (SLU+) - T19-21 (SLU-)
B - Y
SLUT solenoid signal
4th (lock-up) or 5th (lock-up) gear
Pulse generation
(see waveform 4)
T19-25 (THO1) - T19-23 (E2)
L - G
No. 1 ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
T19-24 (THO2) - T19-23 (E2)
BR - G
No. 2 ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
T17-14 (STP) - T19-1 (E1)
G-W - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
T17-14 (STP) - T19-1 (E1)
G-W - BR
Stop light switch signal
Brake pedal is released
Below 1.5 V
T19-3 (NT+) - T19-2 (NT-)
V - P
Speed sensor (NT) signal
Engine is idling
Pulse generation
(see waveform 5)
T19-30 (SP2+) - T19-29 (SP2-)
R - G
Speed sensor (SP2) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 6)
T18-15 (L4) - T19-1 (E1)
G-W - BR
L4 shift position switch signal
Ignition switch ON and transfer shift lever on L4
11 to 14 V
T18-15 (L4) - T19-1 (E1)
G-W - BR
L4 shift position switch signal
Ignition switch ON and transfer shift lever not on L4
Below 1.5 V
T18-16 (TFN) - T19-1 (E1)
W-G - BR
N shift position switch signal
Ignition switch ON and transfer shift lever on N
11 to 14 V
T18-16 (TFN) - T19-1 (E1)
W-G - BR
N shift position switch signal
Ignition switch ON and transfer shift lever not on N
Below 1.5 V
T17-6 (IG2) - T19-1 (E1)
B-O - BR
Ignition switch
Ignition switch ON
11 to 14 V
T17-25 (SPD1) - T19-1 (E1)
V-R - BR
Vehicle speed signal
Vehicle is driven
Pulse generation
(see waveform 7)
T17-21 (CAN+) - T19-1 (E1)
V - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 8)
T17-20 (CAN-) - T19-1 (E1)
P - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 9)

Waveform 1 (Reference)
C175011E01
Item
Content
Symbols (Terminal No.)
T19-9 (SL1+) - T19-8 (SL1-)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
Engine is idling

Waveform 2 (Reference)
C175011E01
Item
Content
Symbols (Terminal No.)
T19-7 (SL2+) - T19-6 (SL2-)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
Engine is idling

Waveform 3 (Reference)
C175011E01
Item
Content
Symbols (Terminal No.)
T19-20 (SLT+) - T19-19 (SLT-)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
Engine is idling

Waveform 4 (Reference)
C175011E01
Item
Content
Symbols (Terminal No.)
T19-22 (SLU+) - T19-21 (SLU-)
Tool Setting
5 V/DIV., 1 msec./DIV.
Condition
5th (lock-up)

Waveform 5 (Reference)
C175014E01
Item
Content
Symbols (Terminal No.)
T19-3 (NT+) - T19-2 (NT-)
Tool Setting
1 V/DIV., 2 msec./DIV.
Condition
Engine is idling

Waveform 6 (Reference)
C175013E03
Item
Content
Symbols (Terminal No.)
T19-30 (SP2+) - T19-29 (SP2-)
Tool Setting
2 V/DIV., 20 msec./DIV.
Condition
Engine is idling

Waveform 7 (Reference)
C170574E01
Item
Content
Symbols (Terminal No.)
T17-25 (SPD1) - Body ground
Tool Setting
5 V/DIV., 20 msec./DIV.
Condition
Rear wheel turning slowly

Waveform 8 (Reference)
C175015E01
Item
Content
Symbols (Terminal No.)
T17-21 (CAN+) - T19-1 (E1)
Tool Setting
1 V/DIV., 10 msec./DIV.
Condition
Ignition switch ON

Waveform 9 (Reference)
C175016E01
Item
Content
Symbols (Terminal No.)
T17-20 (CAN-) - T19-1 (E1)
Tool Setting
1 V/DIV., 10 msec./DIV.
Condition
Ignition switch ON