Home › BODY › ENGINE HOOD / DOOR › HOOD

HOOD > DISASSEMBLY

for Preparation Click here



1. REMOVE HOOD TO RADIATOR SUPPORT SEAL


    B112878E01
  1. Using a clip remover, remove the 6 clips and support seal.

    HINT:
    If clips are damaged during removal, replace them.



2. REMOVE HEADLIGHT COVER TO HOOD SEAL


    B112877E01
  1. Using a clip remover, remove the 18 clips and hood seal.

    HINT:
    If clips are damaged during removal, replace them.



3. REMOVE HOOD INSULATOR


    B111400E02
  1. Using a clip remover, remove the 15 clips and hood insulator.

    HINT:
    If clips are damaged during removal, replace them.



4. REMOVE HOOD BULGE


    B086771E02
  1. Remove the 8 nuts.

  1. Using a moulding remover, pry out the hood bulge.



5. REMOVE HOOD AIR INTAKE SEAL


    B085156E03
  1. Using a clip remover, remove the 18 clips and air intake seal.

    HINT:
    If clips are damaged during removal, replace them.