HOOD > REASSEMBLY |
| 1. INSTALL HOOD AIR INTAKE SEAL |
![]() |
Install the air intake seal with the 18 clips.
| 2. INSTALL HOOD BULGE |
Clean the engine hood surface.
Wipe off the stains with cleaner.
If reusing hood bulge:
Clean the hood bulge.
Wipe off the stains with cleaner.
Install the hood bulge.
![]() |
Install the hood bulge with the 8 nuts.
| 3. INSTALL HOOD INSULATOR |
![]() |
Install the hood insulator with 15 clips.
| 4. INSTALL HEADLIGHT COVER TO HOOD SEAL |
![]() |
Install the hood seal with the 18 clips.
| 5. INSTALL HOOD TO RADIATOR SUPPORT SEAL |
![]() |
Install the support seal with the 6 clips.