Home › ENGINE ยท 2KD-FTV › COOLING › RADIATOR (w/ EGR Cooler)

RADIATOR (w/ EGR Cooler) > DISASSEMBLY

for Preparation Click here



1. REMOVE RADIATOR BRACKET SUB-ASSEMBLY


    A099949E02
  1. Remove the 4 bolts and 2 brackets.



2. REMOVE RADIATOR DRAIN COCK PLUG
  1. Remove the drain plug.

  1. Remove the O-ring.



3. ASSEMBLE SST


    A113337E01
  1. Install the claw to part A of the overhaul handle as shown in the illustration.

    SST
    09230-01010  

  1. While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

    Dimension B:
    0.2 to 0.3 mm (0.008 to 0.012 in.)



4. UNCAULK LOCK PLATE


    A113338E01
  1. Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.

    SST
    09230-01010  



5. REMOVE RADIATOR TANK UPPER AND TANK LOWER


    A099688E01
  1. Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic-faced hammer and remove the tank.

  1. Remove the O-ring.