AIR CONDITIONING PANEL (for Automatic Air Conditioning System) > REASSEMBLY |
| 1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY |
![]() |
Install the air conditioning amplifier to the air conditioner panel sub-assembly.
Attach the 4 claws to install the heater control base.
| 2. INSTALL HEATER CONTROL KNOB |
![]() |
Install the 12 knobs.
| 3. INSTALL HEATER CONTROL BASE SUB-ASSEMBLY |
![]() |
Install the heater control base with the 4 screws.
![]() |
Connect the cooler wire as shown in the illustration.
| 4. INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY |
![]() |
Attach the 4 claws to connect the heater control lower base.
Install the 4 screws.
| 5. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY |
![]() |
Install the heater control and accessory with the 4 screws.