Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › COMPRESSOR AND MAGNETIC CLUTCH (for 5L-E)

COMPRESSOR AND MAGNETIC CLUTCH (for 5L-E) > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK COOLER COMPRESSOR WITH PULLEY ASSEMBLY


    I033658E01
  1. Disconnect the connector from the cooler compressor assembly.

  1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to the body ground.

  1. Check that the magnetic clutch energizes.

    OK:
    The magnetic clutch energizes.

    If the resistance value is not as specified, replace the magnetic clutch assembly.