Home › SECURITIES › THEFT DETERRENT › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > INSPECTION



1. INSPECT SECURITY COURTESY SWITCH (ENGINE HOOD COURTESY SWITCH)


B119751E01
  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Not pushed (ON)
    Below 1 Ω
    1 - 2
    Pushed (OFF)
    10 kΩ or higher

    If the result is not as specified, replace the switch.