FUEL INJECTION PUMP > INSPECTION |
| 1. INSPECT FUEL TEMPERATURE SENSOR |
Measure the resistance of the sensor.

| Tester Connection | Specified Condition |
| 1 (E2) - 2 (THF) | 2.21 to 2.69 kΩ at 20°C (68°F) |
| 1 (E2) - 2 (THF) | 0.287 to 0.349 kΩ at 80°C (176°F) |
| 2. INSPECT INJECTION PUMP DELIVERY VALVE |
![]() |
Pull up the valve and release it. Check that it sinks smoothly to the valve seat. If the operation is not as specified, replace the valve and valve seat as a set.